ViewSonic XG270QG User Guide - Page 12
Installing and Removing the Elite Hood, the screws.
![]() |
View all ViewSonic XG270QG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing and Removing the Elite Hood 1. Prepare both pieces of the Elite Hood as well as a screwdriver. 2. Ensure the hood pieces are in the correct orientation: TOP BOTTOM 3. Line up each screw of the Elite Hood piece with the screw holes on the side of the monitor. 4. Carefully attach the Elite Hood to the monitor, making sure not to over-tighten the screws. 5. To remove the Elite Hood, reverse the previous steps. 12
![](/manual_guide/products/viewsonic-xg270qg-user-guide-3bd6665/12.png)
12
Installing and Removing the Elite Hood
1.
Prepare both pieces of the Elite Hood as well as a screwdriver.
2.
Ensure the hood pieces are in the correct orienta°on:
TOP
BOTTOM
3.
Line up each screw of the Elite Hood piece with the screw holes on the side of
the monitor.
4.
Carefully a²ach the Elite Hood to the monitor, making sure not to over-°ghten
the screws.
5.
To remove the Elite Hood, reverse the previous steps.