Viper 5904 Owner Manual - Page 53
Using the 1 way companion remote, Accessing Commands, Sensor Bypass operation, Button Auto Lock, Car - remote programming
View all Viper 5904 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using the 1 way companion remote The companion 1 way remote commands the system features as shown in the previous table, but without the message display of the Responder HD remote. Siren chirps and vehicle parking light flashes are used to indicate that a command has been received and activated as described in the Basic and Advanced command sections. Accessing Commands Similar to the HD remote, Basic commands are performed when a command button is pressed directly. To perform Advanced Commands press the button 1 to 4 times to access function levels, x4 in the table for example implies pressing 4 times. The LED flashes in groups for a few seconds to indicate the level. Press the desired command button while the LED is flashing to perform the command. Sensor Bypass operation The lights flash each time this command is received to indicate the Sensor bypass type. 2 flashes indicates sensor Warn-away zones are bypassed, 3 flashes indicates sensor Warn-away and Full Trigger zones are bypassed. 1 flash indicates sensor bypass is off. Button Auto Lock When On, the remote control buttons lock if more than 20 seconds lapses between button presses. If a button is pressed when locked, a fault tone is emitted. To unlock the buttons; press the button followed by the button, the buttons unlock and tones play to confirm. Car Select* Car 2 must first be turned On (See Remote Features menu under the following Programming section to turn on). Press and hold the but- 50 © 2011 Directed Electronics. All rights reserved.