Viper 5904 Owner Manual - Page 54
Programming - car alarm
View all Viper 5904 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
ton for 3 seconds. The remote flashes the LED and beeps once or twice to indicate the selected Car is 1 or 2, release the button for Car Select or continue to hold for programming. Release the button, then press and release while the LED and beeps continue to perform Car Select. Once the car is selected a command can be performed by pressing one of the command buttons. * See System Expansion Options for more details . 1-Way Programming To enter; hold the button for 8 seconds, the remote emits one long beep and turns the LED on, the programming main menu has been accessed. To exit; press and release the button to go back and repeat to exit. 1 short and 1 long beep is emitted for each step back, the LED turns off when programming is exited. Sensor Adjust The button is used for sensor adjustment, to avoid unintended alarm triggers, it is recommenced that an authorized Directed dealer perform all sensor adjustments. Remote Features menu Press and release the button, 2 LED flashes and beeps indicate the remote features menu is accessed and can be set. Press buttons indicated below, 1beep and flash turns the feature on, 2 beeps and flashes turns the feature off. s Autolock feature: Press to turn on/off. s Remote Beeps: Press to turn on/off. s Car 2 feature: Press to turn on/off. © 2011 Directed Electronics. All rights reserved. 51