Vtech DS6771-3 User Manual - Page 15
Charge the battery
View all Vtech DS6771-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Charge the battery Place the handset in the telephone base or the charger to charge. Place the headset on the telephone base to charge. Battery indicators The screen is blank, or shows Put in charger and flashes. Battery status The battery has no charge or very little charge. The handset cannot be used. Action Charge without interruption (at least 30 minutes). The screen shows Low battery and flashes. The battery has enough charge to be used for a short time. Charge without interruption (at least 30 minutes). Once you have installed the battery, the handset LCD display indicates the battery status (see the table on next page). The screen shows HANDSET X. The battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use. When it is fully charged, you can expect the following performance: Operation Operating time NOTES • Press CANCEL or place the handset in the telephone base or charger will bypass the set date and time, and voice guide. • For best performance, keep the handset in the telephone base or charger when not in use. Place the headset on the telephone base when not in use. • The handset battery is fully charged after 12 hours of continuous charging. The headset battery is fully charged after 3 hours of continuous charging. • If you place the handset in the telephone base or the charger without plugging in the battery, the screen displays No battery. While in handset use (talking*) Seven hours While handset in speakerphone mode (talking*) Three hours While handset not in Five days use (standby**) While in headset use (talking*) Four hours While headset not in Two days use (standby**) * Operating times vary depending on your actual use and the age of the battery. ** Handset/headset is not charging or in use. To manually set the date and time and the answering system, refer to Configure your telephone and Set your built-in answering system sections. To manually initiate the voice guide, refer to Voice guide under Set your built-in answering system section. 9