Vtech Video Painter User Manual - Page 20

VIDEOPAINTER To choose a picture puzzle: An on-screen command is located at the top of the screen. This allows you to choose new picture puzzles. If you want a different picture puzzle, move the cursor to the on-screen command and press MARK once to view new picture puzzle. There are 30 built-in puzzle pictures. To pick up a puzzle piece: To pick up a puzzle piece, move the cursor to the piece you want and press MARK once. That puzzle piece, outlined in white, now becomes the cursor. To rotate a puzzle piece: Move the puzzle piece into place and press the ROTATE button if necessary. The ROTATE button rotates the puzzle piece 45 degrees clockwise each time you press it. To fit a puzzle piece: Once the puzzle piece is in place, press MARK once. If the position and fit of the piece is considered acceptable, it will "drop" info the framework and the cursor becomes free to pick up another puzzle piece. Repeat the procedure until the puzzle is completed. NOTE: If the puzzle piece doesn't fit, the piece will not be released when you press the MARK key. To abandon a puzzle piece you are carrying: If you find that you have picked up the wrong puzzle piece, press the UNDO button and the piece will jump back to the group on the bottom of the screen. To remove all the pieces that are already in the puzzle, press CLEAR. 17