Vtech Video Painter User Manual - Page 5
Adaptor, Introduction
View all Vtech Video Painter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
TO USE AC ADAPTOR Use a standard 12V, 500mA, center positive 4.-0-- AC adaptor. 1. Make sure unit is turned OFF. 2. Plug power jack into 12V-DC socket on back of unit. 3. Plug adaptor into wall outlet. NOTE: Use of adaptor will override the batteries. FOR MORE EFFICIENT USE OF VIDEO PAINTER, WE STRONGLY SUGGEST THE USE OF A 12 VOLT ADAPTOR. 12 volt adaptors can be purchased at most electronic stores. DC in 12V jack To wall outlet _ 0000 OOOOO4 • C[3OO 00000 I INTRODUCTION' While developing VIDEO PAINTER, we researched and tested a wide variety of TV's and VCR's and found that most house holds have a VIDEO INPUT Jack on their VCR, TV or both. We also talked with consumers to get feed back on the product; how it connects to the TV and VCR and how it plays and performs. From this information, we designed VIDEO PAINTER to connect directly to the VIDEO INPUT Jack of a TV or VCR. NOTE: If you TV or VCR does not have a VIDEO INPUT Jack, then you will need to purchase an RF Modulator. Please refer to the RF Modulator section. 2