Vtech Video Painter User Manual - Page 7

Connecting, Video, Painter, Modulator

Get Vtech Video Painter PDF manuals and user guides View all Vtech Video Painter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

CONNECTING VIDEO PAINTER TO VCR 1. Leave the VCR and TV connected. 2. Hook up Video Cable from VIDEO PAINTER to VIDEO INPUT Jack on the back of the VCR. (If your VCR does not have a VIDEO INPUT Jack please refer to the RF Modulator section.) 3. Make sure the TV/VCR switch (usually on the front of the VCR) is set to VCR. 4. TV and VCR should be tuned to the same channel. (In most cases, this would be channel 3 or 4.) 5. If using an adaptor, make sure that it is properly plugged in and has the correct voltage. 6. Turn the VCR, TV and VIDEO PAINTER ON. 7. If the VIDEO PAINTER is beeping, but you are not getting a picture, please consult the trouble shooting guide. TV VCR CLECCD VIDEO PAINTER a 000 000poo OCICC2 000000 TO THE VIDEO INPUT JACK OF THE VCR VIDEO CABLE (INCLUDED) TO VIDEO OUT RF MODULATOR If your TV does not have a VIDEO INPUT Jack, you will need to purchase an RF Modulator, co-axial cable and 75/300 ohm converter, see the enclosed special offer. If you do not purchase the RF Modulator through VIDEO TECHNOLOGY, they can be purchased at most electronic stores. NOTE: A Game Switch from another system will not work. Be sure to purchase an RF MODULATOR. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
CONNECTING
VIDEO
PAINTER
TO
VCR
1.
Leave
the
VCR
and
TV
connected.
2.
Hook
up
Video
Cable
from
VIDEO
PAINTER
to
VIDEO
INPUT
Jack
on
the
back
of
the
VCR.
(If
your
VCR
does
not
have
a
VIDEO
INPUT
Jack
please
refer
to
the
RF
Modulator
section.)
3.
Make
sure
the
TV/VCR
switch
(usually
on
the
front
of
the
VCR)
is
set
to
VCR.
4.
TV
and
VCR
should
be
tuned
to
the
same
channel.
(In
most
cases,
this
would
be
channel
3
or
4.)
5.
If
using
an
adaptor,
make
sure
that
it
is
properly
plugged
in
and
has
the
correct
voltage.
6.
Turn
the
VCR,
TV
and
VIDEO
PAINTER
ON.
7.
If
the
VIDEO
PAINTER
is
beeping,
but
you
are
not
getting
a
picture,
please
consult
the
trouble
shooting
guide.
TV
VIDEO
PAINTER
VCR
TO
THE
VIDEO
INPUT
JACK
OF
THE
VCR
RF
MODULATOR
CLECCD
a
000
000poo
OCICC2
000000
VIDEO
CABLE
(INCLUDED)
TO
VIDEO
OUT
If
your
TV
does
not
have
a
VIDEO
INPUT
Jack,
you
will
need
to
purchase
an
RF
Modulator,
co
-axial
cable
and
75/300
ohm
converter,
see
the
enclosed
special
offer.
If
you
do
not
purchase
the
RF
Modulator
through
VIDEO
TECHNOLOGY,
they
can
be
purchased
at
most
electronic
stores.
NOTE:
A
Game
Switch
from
another
system
will
not
work.
Be
sure
to
purchase
an
RF
MODULATOR.
4