Vtech Video Painter User Manual - Page 8
Videopafnter
View all Vtech Video Painter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
VIDEOPAfNTER HOOK UP FOR RF MODULATOR Lp I V NOTE: These directions will work for most standard RF MODULATORS and the one purchased through VIDEO TECHNOLOGY. There may be some variation. Please kJ-k consult the directions you receive with your RF Modulator. 1. Hook up Video Cable (included with VIDEO PAINTER) from • VIDEO PAINTER to VIDEO INPUT Jack on the RF Modulator. 2. Hook the Coaxial Cable into the RF OUT on the RF Modulator. If your TV is equipped with a VHF coaxial jack, plug the other 11° end of the coaxial cable into it. A If your TV has VHF screw terminals, you will need to use the 75/300 ohm converter. Attach one end of the converter bVd -• to the coaxial cable and the other end to the VHF screws. 3. Set the RF Modulator and your TV to channel 3 or 4. (Whichever channel is not used for broadcast in your area. Remember to set both the RF Modulator and the TV to the same channel.) 4. Set the 1K/75 ohms switch on the RF Modulator to 75 ohms. 5. Plug the RF Modulator into any wall outlet. 6. Turn on the TV and VIDEO PAINTER. RF MODULATOR WITHOUT VHF COAXIAL JACK RF Modulator (BACK VIEW) VIDEO-INPUT-AUDIO El 0 OHMS 1K 75 RF OUT (BACK VIEW TV) UHF VHF 3O0 ohm FROM VIDEO PAINTER 75 ohm 300 ohm CONVERTER RF MODULATOR WITH VHF COAXIAL JACK 12 VOLT AC TO AC OUTLET RF Modulator (BACK VIEW) VIDEO-INPUT-AUDIO 0 OHMS -I'll El 1K 75 RF OUT O UHF 90 (BACK VIEW TV) VHF 75 ohm FROM VIDEO PAINTER 12 VOLT AC TO AC OUTLET 5