Weider 9000 Uk Manual - Page 12

22. Attach the High Cable (31) to the M10 x 19mm 22 Bolt (not shown) in the bracket on the Weight Carriage (10) with an M10 Nylon Locknut (49). 31 49 Bracket 10 23. Locate the Low Cable (33). Route the eyelet end 23 of the Cable through the hole in the Foot Plate (9) 5 and through the Centre Upright (5). 49 52 39 Wrap the Low Cable (33) under a 90mm Pulley 24 (24). Attach the Pulley inside of the Centre Upright (5) with an M10 x 65mm Bolt (54), two M10 Washers (52), two 15mm x 13mm Spacers (39), and an M10 Nylon Locknut (49). 33 9 39 54 52 24. Wrap the Low Cable (33) around a 90mm Pulley 24 (24). Attach the Pulley to the bottom of the Double "U"-Bracket (29) with an M10 x 45mm Bolt (57) and an M10 Nylon Locknut (49). 25. Wrap the Low Cable (33) under a 90mm Pulley 25 (24). Attach the Pulley to the bracket on the Rear Upright (6) with an M10 x 45mm Bolt (57) and an M10 Nylon Locknut (49). 12 49 29 24 57 33 33 24 49 Bracket 6 57