Weider 9000 Uk Manual - Page 15
Attach the Weight Tube 65 to the Leg Lever 66
View all Weider 9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
33. Orient the Seat (70) with the wide end on the side 33 shown. Attach the Seat to the Bench Frame (63) 70 with four M6 x 16mm Bolts (80). Wide End 63 34. Press three 45mm Square Inner Caps (42) into 34 the Leg Lever (66). Attach the Weight Tube (65) to the Leg Lever (66) with an M8 x 58mm Bolt (41), two M8 Washers (53), a 13mm x 10mm Spacer (75), and an M8 Nylon Locknut (48). Press a 25mm Round Inner Cap (45) into the indicated end of the Weight Tube (65). Press the 25mm Round Angle Cap (76) onto the other end of the Weight Tube. 80 80 42 42 45 75 41 53 65 42 66 76 48 53 35. Lubricate the M10 x 68mm Bolt (46) with grease. Attach the Leg Lever (66) to the Front Leg (64) with the Bolt and M10 Nylon Locknut (49). 36. Press the six 19mm Round Inner Caps (81) into the ends of the three Pad Tubes (71). Slide a Pad Tube (71) into the hole in the Front Leg (64). Slide two Foam Pads (72) onto the ends of the Pad Tube. Slide the other two Pad Tubes (71) into the holes in the Leg Lever (66). Slide two Foam Pads (72) onto each Pad Tube. 35 49 66 46 Lubricate 64 36 72 72 72 81 71 81 71 81 81 66 72 64 72 72 15