Xerox 7300DN User Guide - Page 66
IP Address, IPX Address, MAC Address, Serial Number, Community String, Cancel
View all Xerox 7300DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
paper and toner descriptions and units are retrieved and displayed from the printer. If this information is unavailable the paper and toner description defaults to "Source N" and units defaults to "units". The third portion of the Properties window lists the IP Address, IPX Address, MAC Address, Serial Number, and Community String used by the printer. Note that underneath the Serial Number value is an Edit button which brings up the Edit Serial Number window. Figure 28 Edit Serial Number window The existing serial number for the selected printer is displayed in the serial number edit box. Enter the new serial number in the edit box and select OK to save the change. PrinterMap sends a SNMP request to the printer with the new serial number. Note that the serial changed in this manner cannot be canceled by canceling the Properties window. Select Cancel to dismiss the window without making any changes. NOTE: Serial numbers and serial number manipulation are available only for Xerox manufactured printers. The bottom window section allows configuration for up to three management application paths. Only the active application can be launched (i.e., the application visible in the Printer Management Application edit field). PrinterMap attempts automatically filling in one or more application paths when the printer is discovered. Typically these paths are the vendor specific printer management application or the HTTP address of the printer's internal web server. A Browse button is provided for executable and Launch locations. This Application button initiates the application. Any application may be entered, including parameters, not exceeding 256 characters. Refer to "Launch Application" in Chapter 4 for more information on launching configured management applications. PrinterMap User Guide 50