Xerox Z750/N Setup Guide - Page 12

Novell NetWare Novell NetWare Configuration software for NetWare Networks For Windows environments, the following software is available: I PhaserShare Administrator (Tektronix). Use this application to configure the printer and the network when using NetWare 3.x and 4.x. I NWAdmin (Novell). Use this utility to manage existing queues on networks running NetWare 4.x in NDS mode. For DOS environments, see the PhaserShare Networking Manual. Printing the Configuration Page Your printer's Configuration Page reports information that you need for NetWare configuration. For information on printing a Configuration Page, see The printer's Configuration Page on page 2. On the printer's Configuration Page, all zeros in one or more of the IPX Networks fields indicates that the printer does not recognize the network connection; this probably indicates a faulty cable connection, an incorrect frame type, or Reply to Get Nearest Server has not been set to on. It must be set to on for at least one file server or router on the same segment as the printer. Installing the PhaserShare Administrator The PhaserShare Administrator is on the printer's CD-ROM. A single integrated installer is used to install printer drivers, the PhaserShare Administrator, and other software. 1. Run the installer as described in Tektronix Installer for Windows on page 5. 2. When prompted, make the following selections: I Select Custom Install. I When prompted to select the components and sub-components you want to install, check Net Admin. Support under Components, then check PhaserShare (NetWare) under Sub-components. I To install the drivers and PPD files for your printer (recommended for first-time installations), check Drivers under Components, then check Printer Driver under Sub-components. Networking Setup Guide 7