Xerox Z750/N Setup Guide - Page 18
Setting IPX frame types from the Phaser 750 front, panel
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Novell NetWare Job is serviced, but does not print I Check the PhaserShare Administrator Printer Info dialog box for reported error conditions. I Download the PostScript Error Handler to the printer. For information on using the Tektronix PostScript Error Handler, see your printer's user documentation. I Use the correct Tektronix driver for your printer. I Verify that the Print Server protocol is enabled; use the printer's front panel or check the Administrator's Print Server tab. I Banners, form feeds, and tabs may interfere with the print job. Try disabling these. Setting IPX frame types from the Phaser 750 front panel 1. When the front panel displays Ready, press the Menu button. 2. Press the right-arrow (---->) button until Configuration is displayed. Press the Menu button. 3. Press the right-arrow (---->) button until Network Settings is displayed. Press the Menu button. 4. Press the right-arrow (---->) button until NetWare is displayed. Press the Menu button. 5. Press the right-arrow (---->) button until IPX Frame Type is displayed. Press the Menu button. 6. Press the right-arrow (---->) button until the desired frame type is displayed. Press the Menu button. 7. Press the right-arrow (---->) button to display On or Off. Press the OK button. 8. You are returned to the Frame Types menu; to set another frame type, repeat Steps 6 and 7, or go on to Step 9 to return the printer to normal operation. 9. To return the printer to normal operation, press the Exit button (the left-most button) until the front panel displays Ready. Networking Setup Guide 13
![](/manual_guide/products/xerox-z750n-setup-guide-9fef307/18.png)