Xerox Z750/N Setup Guide - Page 48

Disabling and Enabling Protocols Disabling and enabling protocols: Phaser 750 front panel 1. When the front panel displays Ready, press the Menu button. 2. Press the right-arrow (---->) button until Configuration is displayed. Press the Menu button. 3. Press the right-arrow (---->) button until Network Settings is displayed. Press the Menu button. 4. Press the right-arrow (---->) button until the desired protocol is displayed (for DHCP/BOOTP, display TCP/IP at this point). Press the Menu button. For HTTP, EtherTalk, TokenTalk, and IPP a. Press the right-arrow (---->) button until On or Off is displayed. b. Press the Menu button. For TCP/IP and NetWare a. Press the right-arrow (---->) button until Interface is displayed. NOTE: For DHCP/BOOTP, display DHCP/BOOTP rather than Interface. Press the Menu button. b. Press the right-arrow (---->) button until On or Off is displayed, depending on whether you want to enable or disable the protocol. Press the OK button. 5. To return the printer to normal operation, press the Exit button (the left-most button) until the front panel displays Ready. Disabling protocols: PhaserShare Administrator 1. In the PhaserShare Administrator Main window, select the desired printer from the Printer List. 2. Click Configure Printer. 3. In the Configure Printer dialog box, click the Ethernet (or Token Ring) tab. 4. In the Ethernet (or Token Ring) tab, click Protocol Settings. 5. In the Protocol Settings dialog box, click the tab for the protocol you want to disable. 6. On the tab for the selected protocol, find the field for enabling or disabling the protocol. Select No. 7. Click OK. For more information on the PhaserShare Administrator, see Novell NetWare on page 7. Networking Setup Guide 43