Xerox Z750/N Setup Guide - Page 35
Changing the printer's EtherTalk/TokenTalk zone, optional
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
EtherTalk and TokenTalk Configuration Changing the printer's name: PhaserLink Printer Management Software 1. Connect to the printer via PhaserLink (see Accessing the printer from a browser on page 33). 2. On the left side of any PhaserLink page, click Settings. 3. In the INTERFACES group, click EtherTalk or TokenTalk. 4. In the Printer Name field, enter the desired printer name, then click Apply at the bottom of the page. For more information on PhaserLink Printer Management Software, see PhaserLink Printer Management Software on page 33. Changing the printer's EtherTalk/TokenTalk zone (optional) There are two ways to change the printer's zone: I With a TCP/IP connection and a World Wide Web browser, you can use PhaserLink Printer Management Software; see the next topic Changing the printer's zone: PhaserLink Printer Management Software on page 30. I You can also change the printer's zone using PostScript utility files; see the README files on the printer's CD-ROM. The Macintosh README file is in the Network Utilities folder; the PC README file is in the UTILS directory. Changing the printer's zone: PhaserLink Printer Management Software 1. Connect to the printer via PhaserLink (see Accessing the printer from a browser on page 33). 2. On the left side of any PhaserLink page, click Settings. 3. In the INTERFACES group, click EtherTalk or TokenTalk. 4. In the Zone field, enter the desired zone, then click Apply at the bottom of the page. For more information on PhaserLink Printer Management Software, see PhaserLink Printer Management Software on page 33. 30 Phaser 750 Color Printer
![](/manual_guide/products/xerox-z750n-setup-guide-9fef307/35.png)