Xerox Z750/N Setup Guide - Page 31
Supported DHCP fields, Setting the IP address, PhaserLink Printer, Management Software
![]() |
UPC - 042215455084
View all Xerox Z750/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Setting the Printer's IP Address Supported DHCP fields The printer recognizes the DHCP fields listed in the following table. Field gw ha ht ip lg sm dn ds Description Gateway address list Hardware address Hardware type (see Assigned Numbers RFC) IP address Log host address(es) Subnet mask IP domain name DNS server IP address Values List of IP addresses separated by spaces. Hexadecimal; the ha tag must be preceded by the ht tag. Unsigned decimal, octal, or hexadecimal integer, or one of the following symbolic names: For UNIX Ethernet: ethernet or ether for 10-Mbit Ethernet (DIX encapsulation); ieee802 for IEEE 802 Ethernet (SNAP encapsulation). For UNIX Token Ring: token ring For OS/2 Ethernet or Token Ring: ether Single IP address. List of IP addresses separated by spaces. Single IP address. Single domain name. Printer recognizes up to two IP addresses, separated by spaces. Setting the IP address: PhaserLink Printer Management Software After setting the printer's IP address by another method, you can perform the rest of the TCP/IP configuration using PhaserLink Printer Management Software, if you have a World Wide Web browser. For more information on PhaserLink Printer Management Software, see PhaserLink Printer Management Software on page 33. 1. Connect to the printer via PhaserLink (see Accessing the printer from a browser on page 33). 2. On the left side of any PhaserLink page, click Settings. 3. In the INTERFACES group, click TCP/IP. 4. Enter your printer's settings and click Apply at the bottom of the page. 5. The printer responds by displaying a dialog box that allows you to reset the printer. The changes will not take effect until the printer is reset. 26 Phaser 750 Color Printer
![](/manual_guide/products/xerox-z750n-setup-guide-9fef307/31.png)