Yamaha CDR-HD1300 Owner's Manual - Page 73

COPYING AND RECORDING ONTO A CD-R OR CD-RW DISC RECORDING FROM AN EXTERNAL COMPONENT ONTO A CD-R OR CD-RW DISC You can record from an external component directly to a CD-R or CD-RW disc. Following is an explanation for digital recording from an external CD player connected to the DIGITAL IN (OPTICAL) or DIGITAL IN (COAXIAL) jacks on this unit. Note • Before starting to record, check the remaining time available for recording on the CD-R or CD-RW disc (see page 11). 4 JKL 5 MNO 6 PQR NATURAL SOUND HDD/CD RECORDER POWER PHONES LEVEL MIN MAX HDD CDR COPY A.M.Q.R. 1 1 44 TEXT/TIME MODE MULTI JOG PUSH ENTER MENU TRACK NO. COMPLETE CLEAR BOOKMARK DIGITAL REC LEVEL REC FINALIZE ERASE INPUT OPTICAL COAXIAL ANALOG ANALOG REC LEVEL MIN MAX 1 9 OPEN/CLOSE COPY TIMER REC REC A.M.Q.R. FINALIZE ERASE TRACK NO. TEXT/TIME INPUT WRITE MODE MENU COMPLETE CLEAR ENTER 1 ABC 2 DEF 3 GHI 2 3 4 4 4 7 STU 8 VWX 9 YZ 0 SPACE +10 SYMBOL BOOKMARK REPEAT RANDOM INTRO GROUP SKIP 6 HDD CDR 6 8 2 9 63 8 4 JKL 5 MNO 6 PQR 7 STU 8 VWX 9 YZ 0 SPACE +10 SYMBOL BOOKMARK 1. Load a new CD-R or CD-RW disc, or a CD-R or CD- RW disc without finalization. Press v (OPEN/CLOSE on the remote control) to open the disc tray, and place a CD-R or CD-RW disc with its recordable side facing down. Then press v (OPEN/CLOSE on the remote control) to close the disc tray. 2. Press REC. OPC may start on the loaded CD-R or CD-RW disc depending on its recording condition. It takes approximately 15 seconds to complete the adjustment. OPC Adjust REC SYNC L dB -30 -10 -6 -2 0 R CDR If this unit determines that OPC is not needed for the disc loaded, "Standby" flashes on the display. Standby SYNC REC L dB -30 -10 -6 -2 0 R CDR REPEAT RANDOM NTRO 4. Adjust the recording level. The adjustment of the digital recording level is not normally necessary. However it is possible to adjust the recording level to suit your needs. Play the loudest passage (highest sound level) of the source to be recorded. By pressing MENU, the display changes for the level adjustment. Rotate the MULTI JOG knob (press +/- on the remote control) to adjust the recording level. When the adjustment is completed, press MULTI JOG knob (ENTER on the remote control) to confirm the adjusted recording level. When making an analog recording... Rotate the ANALOG REC LEVEL control to adjust the recording level. Note • Adjust the recording level so that the red part on the peak level meter does not light at the loudest sound levels. The following message appears on the display and this unit enters the recording pause mode. 1 SYNC 0 0 0 REC L dB -30 -10 -6 -2 0 R CDR Note • If you leave this unit in the recording pause mode for approximately 5 minutes, this unit returns to the stop mode automatically. 3. Select the input source to be recorded. When making a digital recording from an external CD player, press INPUT until the OPTICAL or COAXIAL indicator lights up. See "Adjusting the Recording Level" on page 24 for details. 5. Select a recording mode. If you wish to record only one track, select "Multi Synchro" and set to 1 track for the number of tracks to be recorded. If you wish to start and stop recording, and place track markers automatically, select "All Synchro". If you wish to automatically make finalization on a CD-R or CD-RW disc as well, select "Full Auto". See "Setting the recording mode" on page 69 for details. When making an analog recording... Press INPUT until the ANALOG indicator lights up. English E-67