Yamaha CP50 Owner's Manual - Page 10

Control Panel Component Names & Functions Control Panel (Diagram shows CP5) Component Names & Functions         ?   !  A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3   Pitch bend wheel (page 30) Use this controller to temporarily shift the pitch of notes upward or downward.  Headphones jack (page 15) Use this standard audio jack to connect a pair of stereo headphones.  [GAIN] knob (page 40) CP5 only Turn this knob to adjust the input gain for audio signals coming from the CP5's [MIC INPUT] jack. This type of adjustment may be necessary as different microphones output signals at a wide range of volumes. Increase the gain by rotating the knob clockwise, and decrease it by rotating the knob counter-clockwise.  [MASTER VOLUME] dial (page 17) Turn this dial to adjust the overall volume of the stage piano.  Part Volume knobs Use these knobs to set the individual volumes of the various parts making up the currently selected Performance (page 22). Increase the part volume by rotating its knob clockwise, and decrease it by rotating the knob counter-clockwise. The lamp to the bottom-right of each knob lights up whenever the corresponding part is selected. From left to right, the Part Volume knobs on the CP5 are labeled [MIC INPUT], [TRACK], [LEFT2], [LEFT1], [RIGHT2], and [RIGHT1]. On the CP50, meanwhile, these knobs are labeled [TRACK], [LEFT], and [RIGHT].  Part buttons Press these buttons to toggle the various parts making up the currently selected Performance on or off as required. The lamp to the top-left of each Part button lights up whenever the corresponding part is turned on. Furthermore, if you press and hold one of these buttons (for at least one second), the corresponding part will be selected, its parameter setting screen will be displayed, and its lamp will start to flash. Even if a part's parameter setting screen is being displayed, it can still be toggled on and off by pressing the corresponding Part button. It should be noted that these lamps will flash in one of two different ways to indicate whether the part is on or off; specifically, the lamp stays lit longer when the part is on, and it stays off longer when the part is off. From left to right, the Part buttons on the CP5 are labeled [MIC INPUT], [TRACK], [LEFT2], [LEFT1], [RIGHT2], and [RIGHT1]. On the CP50, meanwhile, these buttons are labeled [TRACK], [LEFT], and [RIGHT].  [SPLIT] button (page 32) Press this button to toggle the splitting of Performance zones on and off. The lamp to the top-left of the button lights up whenever splitting is turned on. The same operation can be performed using the Split parameter from the Common Settings screen.  [VOICE] button (page 33) Press this button to open the parameter setting screen for the currently selected part's Voice block. The lamp to the top-left of the button lights up whenever this screen is being displayed. 10 CP5/CP50 Owner's Manual