Yamaha CP50 Owner's Manual - Page 36

Quick Start Guide Creating Original Performances 19 Press the [- PAGE] and [PAGE 3] buttons to navigate between the screen's other pages, and turn the knobs to modify parameters as required. NOTE For more details regarding the parameters on these pages, refer to the Reference Manual pdf document. 20 Press the [STORE] button to store your Performance. Settings from the Voice block, the Pre-Amplifier block, the Modulation Effect block, and the Power-Amplifier / Compressor block (CP5 only), together with parameter settings for parts, the Common Settings area, and the Reverb block are stored in the form of a Performance. For details regarding the storing procedure, refer to page 50. NOTE If you wish to store your Performance in an External Performance memory, ensure that the USB flash-memory device containing that Performance memory is plugged into the USB TO DEVICE port before pressing the [STORE] button. 21 Press and hold the [MASTER COMPRESSOR] button (for at least one second). The Master Compressor screen will be displayed. NOTE You can also jump to the Master Compressor screen by holding down the [EXIT/jump to edit] button and pressing the [MASTER COMPRESSOR] button. 22 Press the [- PAGE] and [PAGE 3] buttons to navigate between the screen's pages, and turn the knobs to modify parameters as required. NOTE For more details regarding the parameters on these pages, refer to the Reference Manual pdf document. 23 Adjust the overall tone using the [MASTER EQUALIZER] knobs located at the right of the control panel. 24 Press the [STORE] button to store the modified Master Compressor and Master Equalizer settings. The settings adjusted using the [MASTER EQUALIZER] knobs can also be modified using the master equalizer parameters from the Utility screen. Accordingly, Master Compressor and Master Equalizer settings are stored within User Memory as part of the stage piano's system settings. For details regarding the storing procedure, refer to page 50. 36 CP5/CP50 Owner's Manual