Yamaha CP50 Owner's Manual - Page 44
Using Key-on Start to Begin Recording, plugged-in USB flash-memory device, and in addition
UPC - 086792936963
View all Yamaha CP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Quick Start Guide Recording Keyboard Performances 7 Press the [+] (Stop) button. Recording will end and the Performance screen will be displayed. The recorded Wave file will be stored on the plugged-in USB flash-memory device, and in addition, it will be automatically set as the backing track for the current Performance. 8 Press the [3/,] (Play / Pause) button to listen to your recording. You can stop playback at any time by pressing the [+] (Stop) button. Using Key-on Start to Begin Recording Your CP5 or CP50 also features a Key-on Start function that can be used to start recording in response to playing of the keyboard. The following describes how to use this function. 1 Press the [SONG SETTING] button, followed by the [3] button. Page 3 of the Song Setting screen will be displayed. 2 Turn Knob 1 to set the StartKey parameter as required. If you set this parameter to "all", any key can be pressed to start recording. 3 Press the [REC] button to call up the Record screen, and then set the parameters on this screen as required for your recording (pages 41, 43). 4 Hold down the [+] (Stop) button and press the [3/,] (Play / Pause) button. Recording will be set to Standby condition. 5 Press the key that you set for the StartKey parameter in Step 2 above. Recording will start. You can stop recording at any time by pressing the [+] (Stop) button. 44 CP5/CP50 Owner's Manual