Yamaha CP50 Owner's Manual - Page 38
PreDrum Phrase, CAUTION
UPC - 086792936963
View all Yamaha CP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Quick Start Guide Performing with a Backing Track 3 Press the [- PAGE] or [1] button to ensure that Page 1 of the Song Setting screen is displayed. On this page, you can specify a backing-track type and number. 5ZQF FBU 1SF%SVN1ISBTF 4 Turn Knob 1 to select the required backing-track type. 5 If you have selected Preset Drum Pattern (PreDrum), turn Knob 2 to indicate whether you want to use a Drum Phrase or Drum Kit, and then select the required phrase or kit number using Knob 3. Alternatively, if you have selected User Song (UsrSong) or Wave file (Wave), turn Knob 3 to select the required user-song number or file. 6 Navigate to Pages 2 and 3 using the [PAGE 3] button. Using Knobs 1 to 3, modify parameters such as tempo, time signature, and track name as required. NOTE If you have selected a Wave file recorded using your CP5 or CP50, be sure to leave the 7th and 8th characters in the file name - namely, } and { - unchanged. If these characters were to be modified, the replay volume on your stage piano would become extremely low as a result. CAUTION If you have selected a Wave file that was not recorded using your CP5 or CP50, be sure not to add } and { as the 7th and 8th characters of the file name. Failure to observe this precaution could lead to extremely high volumes upon playback (as the output level is increased automatically whenever these characters are in the positions indicated). NOTE For more details regarding the parameters on these pages, refer to the Reference Manual pdf document. 7 If you have selected a Preset Drum Pattern (PreDrum) or a Wave file (Wave) for use as the backing track, press and hold the [TRACK] button (for at least one second) to call up the parameter setting screen for the TRACK part. If, on the other hand, you have selected a User Song (UsrSong), skip to Step 10 below. NOTE You can also jump to the parameter setting screen for the TRACK part by holding down the [EXIT/jump to edit] button and pressing the [TRACK] button. 38 CP5/CP50 Owner's Manual