Yamaha CP50 Owner's Manual - Page 17

Adjusting the Display Brightness Adjusting the Display Brightness 1 Press the [UTILITY] button on the right-hand side of the control panel to call up the Utility screen. 2 Press the [A] button on the right-hand side of the control panel to jump to Page 11 (A) within this screen. 3 Adjust the display brightness by turning Knob 1 and changing the value of the Bright (brightness) parameter. The darkest setting is "1", and the brightest setting is "4". 3
#SJHIU
"VUP-PBE 1 2 PGG Knob 1 Knob 2 Knob 3 Setting Up CP5 NOTE As an alternative to the above-described method, the display brightness can also be adjusted directly using the [UTILITY] button and the  [- PAGE] and [PAGE 3] buttons. Specifically, the brightness can be reduced by holding down the [UTILITY] button and pressing the [- PAGE] button, and it can be increased by holding down the [UTILITY] button and pressing the [PAGE 3] button. Adjusting the Volume The stage piano's output volume is adjusted using the [MASTER VOLUME] dial located at the left of the control panel. Whenever making adjustments using this dial, it is wise to listen to the actual volume as you play. CP5 - + NOTE The [MASTER VOLUME] dial also controls the volume of the headphones. NOTICE Whenever you make adjustments using the [MASTER VOLUME] dial, you simultaneously set the level of sound being output via the headphones jack, the unbalanced [L/MONO] and [R] output jacks, and in the case of the CP5, the balanced [L] and [R] output connectors. It is very important to remember this fact if monitoring via headphones when keyboard amplifiers or powered speakers are also connected as they may become extremely loud. CP5/CP50 Owner's Manual 17