Yamaha CP50 Owner's Manual - Page 35

Volume, Pan RevSend, Name=[CP Perf1, Cursor Data, RevType, RichHall

Get Yamaha CP50 PDF manuals and user guides
UPC - 086792936963
View all Yamaha CP50 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Creating Original Performances 10 Repeat the above process from Step 6 for any other part blocks that you wish to configure. When all of the required settings have been made, proceed to Step 11. 11 Press and hold the Part button (for at least one second) for the currently selected part. The currently selected part is indicated by lighting of the lamp to the bottom-right of one of the Part Volume knobs (i.e., [LEFT1], [LEFT2], [RIGHT1], or [RIGHT2] on the CP5; [LEFT] or [RIGHT] on the CP50.) As a result of this action, the part's parameter setting page will be displayed. 7PMVNF 1BO3FW4FOE Quick Start Guide Knob 1 Knob 2 Knob 3 12 Press the [- PAGE] and [PAGE 3] buttons to navigate between the screen's pages, and turn the knobs to modify parameters as required. NOTE For more details regarding the parameters on these pages, refer to the Reference Manual pdf document. 13 Repeat the above process from Step 2 for each left and right part that you wish to configure. When the setting of these parts has been completed, proceed to Step 14. 14 Press the [COMMON] button. The Common Settings screen will be displayed. /BNF

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Creating Original Performances
CP5/CP50 Owner’s Manual
35
Quick Start Guide
10
Repeat the above process from Step 6 for any other part blocks that you wish to configure. When all of the required
settings have been made, proceed to Step 11.
11
Press and hold the Part button (for at least one second) for the currently selected part.
The currently selected part is indicated by lighting of the lamp to the bottom-right of one of the Part Volume knobs
(i.e., [LEFT1], [LEFT2], [RIGHT1], or [RIGHT2] on the CP5; [LEFT] or [RIGHT] on the CP50.) As a result of this action,
the part’s parameter setting page will be displayed.
12
Press the [
L
PAGE] and [PAGE
R
] buttons to navigate between the screen’s pages, and turn the knobs to modify
parameters as required.
NOTE
For more details regarding the parameters on these pages, refer to the
Reference Manual
pdf document.
13
Repeat the above process from Step 2 for each left and right part that you wish to configure. When the setting of
these parts has been completed, proceed to Step 14.
14
Press the [COMMON] button.
The Common Settings screen will be displayed.
15
Press the [
L
PAGE] and [PAGE
R
] buttons to navigate between the screen’s pages, and turn the knobs to modify
parameters as required.
NOTE
For more details regarding the parameters on these pages, refer to the
Reference Manual
pdf document.
NOTE
For details regarding the setting of names, refer to the
Basic Operations
section above (page 20).
16
Press and hold the [REVERB] button (for at least one second).
The Reverb screen will be displayed.
NOTE
You can also jump to the Reverb screen by holding down the [EXIT/jump to edit] button and pressing the [REVERB] button.
17
Press the [
L
PAGE] or [1] button to ensure that Page 1 is displayed.
18
Turn Knob 1 to select a reverb type.
Volume
Pan RevSend
E
100
L63
127
Knob 1
Knob 2
Knob 3
Name=[CP Perf1
]
E
(Cursor) (Data)
Knob 1
Knob 2
Knob 3
RevType
E
RichHall
Page 1