Yamaha CS1x Owner's Manual - Page 27
PORTA Portamento, ASSIGN1 PARAM ASSIGN 1 Parameter, FC Foot Control, SWITCH, FMOD Filter Modulation
View all Yamaha CS1x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
s FC (Foot Control) This sets the parameters controlled by a Foot Controller connected to the FOOT CONTROLLER jack on the rear panel. There are three parameters: FMOD (Filter Modulation), CUTOFF, and VARI EF (Variation Effect). Filter Modulation Cutoff s PORTA (Portamento) This sets the Portamento function. Portamento continuously changes the pitch from one note to the next, thus letting you glide the pitch from one note to the next. There are two parameters, SWITCH and TIME. Values can be set for each Layer. Switch Time Variation Effect FMOD (Filter Modulation): Sets the filter modulation depth created by the LFO (Low Frequency Oscillator). The value set here will determine the range of the filter modulation by the Foot Controller. Pressing the Foot Controller will increase the depth of the filter modulation. CUTOFF: Sets the range of the cutoff frequency points above which other frequencies are cut off. The value set here will determine the range of the cutoff frequency points by the Foot Controller. Pressing the Foot Controller will raise the cutoff frequency point (i.e., make the voice brighter). VARI EF (Variation Effect): Determines the Variation effect range set by the EFFECT parameters (page 23), controlled by the Foot Controller. NOTE For details about which parameters the Foot Controller can control, see the Effect Parameter List on page 49. Settings: FMOD (Filter Modulation): 0~127 CUTOFF: -64 ~ +63 VARI EF (Variation Effect): -64 ~ +63 SWITCH: Turns the Portamento on or off. (for each layer) TIME: Sets the time it takes for the pitch to reach the next note played. (for all layers) Settings: SWITCH: on, off TIME: 0~127 s ASSIGN1 PARAM (ASSIGN 1 Parameter) This determines which parameter will be controlled by the ASSIGN 1 Sound Control Knob. You can choose from 28 types of parameters. The parameter assigned to the ASSIGN1 knob as the default differs depending on the Performance selected. Settings: For details about each parameter, see the reference pages as listed on the next page. 26