Yamaha CS1x Owner's Manual - Page 41

In Utility mode you can set the CS1x system and MIDI parameters. CS1x SYSTEM SETTINGS MASTER TUNE KBD TRANS VEL CURVE VEL FIX CS1x MIDI MIDI SETTINGS TRANS CH RCV CH DEVICE NO LOCAL BULK DUMP ASSIGN CONTROL CHANGER NUMBER Entering Utility Mode Press the UTILITY button. A [v] mark appears in the LCD below the word "UTILITY". Parameter Name DEMO PERFORMANCE MULTI STORE UTILITY NOTE The LCD will display the parameter settings previously selected in Utility mode. The first time you press the UTILITY button after turning the power on, the LCD will display the first page (Master Tune) in Utility mode. q Procedure 1. Select the parameter. Press the Parameter Value UP/DOWN button corresponding to the parameter you want to edit once to select the parameter and display the settings in the LCD. DEMO PERFORMANCE MULTI TIME BANK TIME LEVEL PROGRAM VOLUME TIME PAN LEVEL REV SEND TIME EFFECT CHO SEND LEVEL VARI SEND STORE UTILITY SYSTEM MIDI MASTER KBD VEL VEL TRANS RCV DEVICE TUNE TRANS CURVE FIX CH CH NO NOTE Other parameters will appear in the LCD when you press the other Parameter Value UP/DOWN buttons. Continue setting the other parameters. NOTE Press the PERFORMANCE button or the MULTI button to exit Utility mode and return to each respective mode. NOTE It is not necessary to store changes made in the Utility mode. The CS1x will remember any changes you make in this mode. q Description of Each Function SYSTEM This sets the tuning and other keyboard settings for the CS1x tone generator. There are four parameters: MASTER TUNE, KBD TRANS (Keyboard Transpose), VEL CURVE (Velocity Curve) and VEL FIX (Velocity Fix). s MASTER TUNE This tunes the CS1x's tone generator. Basic pitch is 440 Hz at note A3. Master tuning can be adjusted 1 Hz at a time. Settings: -102 Hz to 0 (A3=440 Hz) to +102 Hz s KBD TRANS (Keyboard Transpose) This lets you transpose the pitch in semitones. The transpose value will also be reflected in the Octave Shift function on the panel. 2. Set the value. Press the Parameter Value UP/DOWN button again to set the value. Holding the Parameter Value UP/DOWN button changes the value continuously. The [UP] button increases the value and the [DOWN] button decreases the value. DEMO PERFORMANCE MULTI TIME BANK TIME LEVEL PROGRAM VOLUME TIME PAN LEVEL REV SEND TIME EFFECT CHO SEND LEVEL VARI SEND STORE UTILITY SYSTEM MIDI MASTER KBD VEL VEL TRANS RCV DEVICE TUNE TRANS CURVE FIX CH CH NO NOTE You can also use the numeric keypad (0~9) or the Data Entry knob to change the value. 40 Settings: -36 to 0 (standard) to +36 NOTE This function setting is related to OCTAVE SHIFT on the panel, the indication may be changed after using the OCTAVE SHIFT function.