Yamaha CS1x Owner's Manual - Page 46

1. Set each Sound Control Knob to your preference. AMP EG ATTACK RELEASE ASSIGN 1/DATA FILTER CUTOFF RESONANCE ASSIGN 2 2. Hold STORE and press the SCENE 1 button to store the current Sound Control Knob settings to the SCENE 1 button memory. To store another set of Sound Control Knob settings, hold STORE and press the SCENE 2 button. DEMO PERFORMANCE MULTI STORE UTILITY 2 MW/FC 1 SCENE The following message will appear in the LCD when the Scene is stored to the edit buffer. Selecting a Scene First select the Performance to which you have stored a Scene. Then press the SCENE 1 or SCENE 2 button to select the Scene. The LED by the button will light to indicate that you have activated the Scene settings. Each Sound Control Knob will be disabled when a Scene is selected, and you will not be able to change the parameters using the knobs. You can use the Modulation Wheel or Foot Controller to change the parameters (Scene settings) continuously between the SCENE 1 and SCENE 2 settings in realtime. The minimum position of the controller is Scene1, and the maximum postion is Scene 2. For details about which controller is used to change between two Scenes, see page 43. 2 MW/FC 1 SCENE SCENE 2 SCENE 1 MODULATION Changes continuously between SCENE 1 and SCENE 2 Example: Settings stored to the SCENE 1 button. 3. Store the Scene to the currently selected Performance using the Performance store operation. 45