Yamaha CVP-600 Owner's Manual - Page 113

Song Recording CSelect the desired track for recording Press the TRACK < or > buttons or use the data dial or [-/+] buttons to select the track. The selected track is indicated by an underline mark. Use the LCD button at the far right to set the selected tracks to RECORD (record enable) or OFF (record/playback disable). PLAY can only be selected for tracks which contain data. When a track is muted, the track number is "ghosted" (shown in lighter indication) in the display. Three separate tracks can be set to record simultaneously when recording keyboard parts. If you intend to record using the Dual or Split functions, two tracks must be record-enabled. If you intend to use both the Dual and Split functions simultaneously, three tracks must be selected. If Auto Accompaniment and/or Harmony are turned on, the recording track numbers are automatically fixed, as described below. * If Auto Accomapniment is turned on, tracks 9 through 16 are automatically record-enabled for recording the Auto Accompaniment data. If the Harmony function is turned on, tracks 6 through 8 are automatically record-enabled for recording the Harmony data. When the RHYTHM button is pressed, tracks 9 and 10 are automatically selected for the rhythm data. Set tracks 9 and 10 to RECORD, PLAY, or OFF by using the LCD button at the far right. • Track 10 (and 9, in some cases) can only be used to record the rhythm sound of the accompaniment style and cannot be used to record keyboard part. Also, the keyboard part should be recorded on a track other than those used for Harmony or Auto Accompaniment. • When Auto Accompaniment is turned on, Synchronized Start recording is automatically set to stand-by. • When the RHYTHM tracks (9 and 10) are set to RECORD, the metronome will sound to provide a timing guide in the Synchronized Start mode. CVP-98/96/600 111 111