Yamaha CVP-600 Owner's Manual - Page 22
Select the band frequency range to be adjusted., Change the value., ON/OFF
View all Yamaha CVP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Adjusting the Timbre of the Sound XSelect the band (frequency range) to be adjusted. ..... Select the band you wish to adjust by pressing the BAND < or > button. The central frequency of the selected band (expressed in Hz) is shown in the BAND < > section of the display. CChange the value Change the value of the gain either by pressing the GAIN w v buttons, or by using the data dial or [-/+] buttons. Since the value can be changed during playback, you can adjust the settings while listening to the changes in the sound. The value is shown in the GAIN section of the display. If you change the value (even slightly) when any type except USER is selected, USER will be highlighted and the newly set value will overwrite the original USER setting. Gain • Range: -12 - 0 - +12 (dB) s EQ LOCK ON/OFF When equalizer setting values are contained in the song data or when the equalizer setting data is received via MIDI, the current settings in the MASTER EQUALIZER display will overridden by the settings of the song data or MIDI data. Set the EQ LOCK to ON to prevent reception of this data, or set to OFF to enable reception. EQ LOCK ON/OFF • Settings: ON/OFF • Basic setting: OFF 20 20 CVP-98/96/600