Yamaha CVP-600 Owner's Manual - Page 47
Selecting the Effect Type
View all Yamaha CVP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Voice Effects Selecting the Effect Type Select the Effect Type by pressing the left/right LCD buttons in the EFFECT pop-up display. • Range: (Refer to the Effect Type list.) • Basic setting: Differs depending on the voice. • Backup of last settings: OFF • When other effect type or OFF messages are received via MIDI, XG EFFECT is indicated in the display. • The word "delay" refers to the echolike effect of delayed repeats of the sound. You can also select the Effect Type by using the EFFECT TYPE w v buttons, or by pressing EFFECT TYPE (to highlight the parameter) and using the data dial or [-/+] buttons. To reset the value to the basic setting, simultaneously press EFFECT TYPE w v or simultaneously press the [-/+] buttons. The Reverb Types in the list below can also be selected from the effect display. When Using the DUAL or SPLIT Function: • When the effects of both voices are set to ON, and the types are different, the effect for the second voice of the Dual mode or the left voice of the Split mode may be temporarily cancelled in some cases. After this point, if you subsequently increase the Effect Depth value of the second voice of Dual mode or of the left range voice of SPLIT mode, the effects will be applied to both voices. q Effect Type List Reverb Types (selectable from the Effect display) HALL1 HALL2 Concert hall reverb. HALL3 ROOM1 ROOM2 Small room reverb. ROOM3 Effect Types CHORUS1 CHORUS2 CHORUS3 CELESTE FLANGER SYMPHONIC AUTO PAN DELAY L,C,R Conventional chorus program with rich, warm chorusing. Three-phase LFO for richer, more pronounced chorusing. Pronounced three-phase modulation with slight metallic sound. Exceptionally rich & deep chorusing. Several panning effects that automatically shift the sound position (left, right). Three independent delays, for the left, right and center stereo positions. STAGE1 STAGE2 STAGE3 • If the Reverb Type in Effect is selected and both [REVERB] and [EFFECT] are set to on, both reverb effects will be applied. Reverb for solo instruments. DELAY L,R ECHO CROSS DELAY TREMOLO ROTARY FAST ROTARY SLOW PHASER WAH Initial delay for each stereo channel, and two separate feedback delays. Stereo delay. Complex effect that sends the delayed repeats "bouncing" between the left and right channels. Rich Tremolo effect with both volume and pitch modulation. Rotary speaker simulation. Rotary speaker simulation. Pronounced, metallic modulation with periodic phase change. Repeating filter sweep "wah" effect. CVP-98/96/600 45 45