Yamaha CVP-600 Owner's Manual - Page 117
Select the Punch-in mode., Select the Punch-out mode., Start playback and recording.
View all Yamaha CVP-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Song Recording BSelect the Punch-in mode Select the desired Punch-in mode by using the LCD button located second from the right. Two modes are available, as described below. 1ST KEY PEDAL Recording begins as soon as the first key is played, after Punch-in playback is started in step 7 (below). Recording begins as soon as the left pedal is pressed, after Punch-in playback is started in step 7 (below). • When the PEDAL Punch-in mode is selected, the left pedal is automatically assigned for this function only (the normal pedal function is canceled). NSelect the Punch-out mode Select the desired Punch-out mode by using the center LCD button. Two modes are available, as described below. REPLACE PNCH.OUT When recording is stopped, all data following the stopped point will be erased. When recording is stopped, all data following the stopped point will remain intact. MStart playback and recording Press the [PLAY/STOP] or [PAUSE] button to start playback from the current paused location. To start Punch-in record when the 1ST KEY mode is selected, simply begin playing at the point from which you want to record. To start Punch-in record when the PEDAL mode is selected, press the left pedal at the point from which you want to record. • When the PEDAL Punch-in mode is selected, recording can be started directly by pressing the left pedal, without having to start playback by pressing the [PLAY/STOP] or [PAUSE] button. CVP-98/96/600 115 115