Yamaha CVP-600 Owner's Manual - Page 54

Starting/Stopping the Accompaniment Style There are two introduction patterns: Intro A and Intro B. If you press [INTRO] after pressing [MAIN B], the style starts with the Intro B pattern, followed by Main B. ACMP ON VIRTUAL ARRANGER AUTO ACCOMPANIMENT INTRO AUTO FILL MAIN A MAIN B ENDING FADE IN/OUT • If you press the [MAIN A] button before pressing [INTRO] and then press [MAIN B], playback starts with Intro A and continues automatically with the Main B pattern. (The reverse is also true: i.e., selecting Intro B with [MAIN B] before pressing [INTRO], then pressing [MAIN A] to continue with Main A.) s Start with Fade In This function lets you gradually fade in the volume of the Style with any of the start methods above. Press the [FADE IN/OUT] button (the lamp lights) and fade in start is set to stand-by. Press the [FADE IN/OUT] button again to turn the lamp off and can- cel the fade in start. AUTO ACCOMPANIMENT ACMP ON VIRTUAL ARRANGER INTRO AUTO FILL MAIN A MAIN B ENDING FADE IN/OUT To start the style, press the [START/STOP] button, or press the [SYNCHRO] button and play a note or chord on the keyboard. The lamp flashes during the fade in, and the lamp turns off when the fade in is completed. [FADE IN/OUT] can be set to on no matter which pattern ([INTRO], [MAIN A], [MAIN B], [ENDING]) is selected. s Starting styles with the Left Pedal You can also use the left pedal to start the style by setting the the Left Pedal function (page 133) to Start/Stop. The pedal can also be set to control Break, Fade-in/out, Fill-in, or Ending. This setting is exceptionally convenient, since it lets you control the style with your foot while leaving both hands free to play. s [BEAT] ...During style playback, the left-most beat lamp (red) flashes on the first beat of each measure, and the other lamps (green) flash for each successive beat. The current tempo and measure number are shown at the left side of the LCD display. 52 CVP-98/96/600 52