Yamaha PSR-I500 PSR-I500 Owners Manual - Page 38
Recording to a Specified Track, Start/Stop or [REC]
View all Yamaha PSR-I500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Quick Guide Recording Your Performance 5 Press the [ ] (Start/Stop) or [REC] but- ton to stop recording. When using a Style, you can stop recording also by pressing the [INTRO/ENDING/rit.] button, and then waiting until playback ends. or After recording finishes, "Writing!" appears indicating that the recorded data is being stored, and then the recorded track numbers in the display will light. NOTICE • Never attempt to turn the power off when "Writing!" is shown in the display. Doing so can result in a loss of data. 6 To play back the recorded Song, press the [ ] (Start/Stop) button. NOTE • When recording a performance with a Sample Voice, keep in mind that the Sample Voice itself is not recorded. For the performance to sound as you intended, you will need to assign that sample to the keyboard (the same as used when recording). • If you fast forward or rewind during playback of a Song using Sample Voices, the playback sounds differ from the original recording. Limitations while recording • The on/off status of ACMP cannot be changed. • Playback cannot be changed between Style and Riyaz. • The Riyaz number can be changed while the Style number cannot. • When you use Style/Riyaz, the following parameters cannot be changed: Reverb Type, Chorus Type, Time Signature and Style/Riyaz Volume. • Performances with a Split Voice cannot be recorded. • The audio input from an external device (playback sound on the connected computer or audio device) cannot be recorded. • Performances using Sample Voices can be recorded on track 1 only. Recording to a Specified Track This section explains how to record to a specified track. This is useful when you want to record additional performances to an already recorded Song, or re-record only one track of an already recorded Song. 1 Press the [SONG] button, and then select the desired User Song from 061-070 (User 1-10) as the recording target. User 1 061 2 While holding down the [REC] button, press the desired Track button to enter the Record Ready mode. User 1 pEC 001 Flashes Selected track flashes If you want to record only the melody: While holding down the [REC] button, press one of the [1/RIGHT]-[5] buttons. Press and hold If you want to record only the Style playback: Press the [STYLE] button, select the desired Style, then simultaneously hold down the [REC] button and press the [A] button. ACMP is automatically turned on. 38 PSR-I500 Owner's Manual Press and hold