Yamaha QL5 Ql Editor Owner's Manual - Page 29
EQ EQUALIZER, LIBRARY, EQ graph, FREQ FREQUENCY, HIGH shelving, LPF Low Pass Filter, LOW shelving
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
❏ EQ (EQUALIZER) 4 7 8 12 3 5 6 9 0 A 1 LIBRARY Accesses the INPUT EQ page of the Library window. 2 ON Switches the EQ (Parametric Equalizer) on/off of the currently selected channel. 3 EQ graph Indicates the response for the EQ of the currently selected channel. To reset the EQ to flat response, hold down the (< >) key of your computer keyboard and click the graph (The HPF setting will remain.) 4Q These knobs adjust the Q level of the frequency range selected in the EQ graph. 5 FREQ (FREQUENCY) These knobs adjust the center frequency for the four bands LOW, LO-MID, HI-MID, and HIGH. 6 GAIN These knobs adjust the Q, center frequency, and boost/cut amount for the four bands LOW, LO-MID, HI-MID, and HIGH. 7 HIGH shelving If this button is on, the HIGH EQ will be switched to a shelving type (the Q knob of the HIGH EQ will disappear.) 8 LPF (Low Pass Filter) If this button is on, the HIGH EQ will function as a low pass filter. The Q knob of the HIGH EQ will disappear, and the GAIN knob will act as the low pass filter on/off switch. 9 LOW shelving If this button is on, the LOW EQ will be switched to a shelving type (the Q knob of the LOW EQ will disappear.) 0 TYPE I/TYPE II (EQ type) Selects either TYPE I or TYPE II as the EQ type. A ATT (Attenuation) Adjusts the amount of attenuation for the signal level of pre EQ. 29 QL Editor Owner's Manual
![](/manual_guide/products/yamaha-ql5-ql-editor-owners-manual-49cfb04/29.png)