Yamaha QL5 Ql Editor Owner's Manual - Page 95
DELAY TIME Delay time knob, Ø Phase button, GAIN knob, Level meter
![]() |
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
8 DELAY TIME (Delay time knob) This knob sets the delay time of the output port. Rotate (by dragging) this knob to set the delay time. 9 Ø (Phase) button Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase (orange.) It is not adjustable if the output-port is set to the RECORDER. 0 GAIN knob Adjusts the gain level for the signal assigned to the output port. To change the value, rotate (by dragging) the knob in the screen. You can adjust the setting in 0.1 dB steps over a range of -96 to +0 dB. The current value is shown immediately below the knob. A Level meter This meter indicates the level of the signal assigned to the output port. 95 QL Editor Owner's Manual
![](/manual_guide/products/yamaha-ql5-ql-editor-owners-manual-49cfb04/95.png)
QL Editor Owner’s Manual
95
8
DELAY TIME (Delay time knob)
This knob sets the delay time of the output port. Rotate (by dragging) this knob to set the delay time.
9
Ø (Phase) button
Switches the phase of the signal assigned to the output port between normal phase (black) and reverse phase (orange.)
It is not adjustable if the output-port is set to the RECORDER.
0
GAIN knob
Adjusts the gain level for the signal assigned to the output port. To change the value, rotate (by dragging) the knob in
the screen. You can adjust the setting in 0.1 dB steps over a range of –96 to +0 dB. The current value is shown immedi-
ately below the knob.
A
Level meter
This meter indicates the level of the signal assigned to the output port.