Yamaha QL5 Ql Editor Owner's Manual - Page 64

1 2 3 1 Rack No. (Rack selection) Select the rack module of the EFFECT rack that you want to control. 2 BYPASS This button temporarily bypasses the effect. 45 3 CUE This button cue-monitors the output of the currently selected effect. 6 NOTE If the Channel Select/Sends On Fader checkbox in the System Setup dialog box is not checked, the [CUE] button will be hidden in the screen. 4 EFFECT NAME Indicates the title of the currently selected effect. 5 TYPE (EFFECT TYPE) Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click the text box, and select the desired effect type from the popup menu that appears. 6 LIBRARY This button accesses the effect library. Clicking this button will open the EFFECT page of the Library window. 7 Input patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R input channels of the internal effect. NONE No assignment 8 MIX 1-16 MIX channel 1-16 7 MATRIX1-8 MATRIX channel 1-8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS1 CH1-CH64 (CH 1-32 on the QL1) Insert-out 1 of INPUT CH1-64 (1-32 on the QL1) INS1 MIX1-MIX16 MIX channel 1-16 insert out 1 INS1 MTRX1-MTRX8 MATRIX channel 1-8 insert out 1 0 INS1 ST L, INS1 ST R, INS1 M(C) Insert-out 1 of STEREO channel L/R or the MONO channel 9 INS2 CH1-CH64 Insert-out 2 of input channel 1-64 (CH 1-32 on the QL1) (1-32 on the QL1) INS2 MIX1-MIX16 MIX channel 1-16 insert out 2 A INS2 MTRX1-MTRX8 MATRIX channel 1-8 insert out 2 INS2 ST L, INS2 ST R, INS2 M(C) Insert-out 2 of STEREO channel L/R or the MONO channel The channel name is shown in the boxes immediately below. 64 QL Editor Owner's Manual