Yamaha QL5 Ql Editor Owner's Manual - Page 35

4 IN (Insert in) Click this to select the input port that will be assigned to insert-in, from the following choices. NONE DANTE 1-32, DANTE 33-64 (only QL5) INPUT 1-16, INPUT 17-32, (only QL5) SLOT1-1, SLOT1-2...SLOT2-15, SLOT2-16 GEQ1L(A), GEQ1R(B)...GEQ8L(A), GEQ8R(B) FX1L(A), FX1R(B)...FX8L(A), FX8R(B) PR1L(A), PR1R(B)...PR8L(A), PR8R(B) No assignment DANTE INPUT 1-32, DANTE INPUT 33-64 (only QL5) INPUT jacks 1-16, INPUT jacks 17-32 (only QL5) Input channels of an I/O card installed in slots 1-2 L/R outputs of GEQ rack 1-8 L/R outputs of EFFECT rack 1-8 L/R outputs of PREMIUM rack 1-8 5 HA (HA analog gain) Adjusts the analog gain for INPUT. This knob appears only if the channel is patched to a head amp. 6 48V (Phantom power) Switches phantom power (+48V) on/off. This button appears only if the channel is patched to a head amp. 7 GC (Gain Compensation) Turns head amp analog gain compensation on/off. ❏ DIRECT OUT (except for ST IN channels) 1 2 3 4 1 ON Turns the direct output on/off. You can right-click ( key + click) the button to display a popup menu and select ALL ON or ALL OFF. 2 DIRECT OUT GAIN Adjusts the gain of the direct output. The current value is shown in the numerical box below the knob. You can set this to the nominal value (0.0 dB) by holding down the (< >) key and clicking the knob. 3 DIRECT OUT PORT Click this to select one of the following output ports as the one used for direct out. NONE DANTE 1-32, DANTE 33-64 (only QL5) OMNI 1-8, OMNI 9-16 (only QL5) REC L, REC R SLOT1-1, SLOT1-2...SLOT2-16 DIGI L, DIGI R No assignment DANTE OUTPUT 1-32, DANTE OUTPUT 33-64 (only QL5) OMNI OUT jacks 1-8, OMNI OUT jacks 9-16 (only QL5) L/R inputs of RECORDER Output channels of an I/O card installed in slots 1-2 L/R channels of the DIGITAL OUT jack 4 DIRECT OUT POINT Selects the position at which direct out will be patched. Choose from PRE HPF, PRE EQ, PRE FADER, or POST ON. 35 QL Editor Owner's Manual