Yamaha QL5 Ql Editor Owner's Manual - Page 38
ST/MONO button, LCR button, PAN BALANCE for, STEREO bus, CSR Center Side Ratio, for MONO mix channel]
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
❏ TO STEREO/MONO Here you can specify how the signal will be sent from the MIX channel to the STEREO bus/MONO bus. MODE • ST/MONO button When this button is on, the signal will be sent to the STEREO bus and independently to the MONO bus. [for MONO mix channel] [for STEREO mix channel] PAN (BALANCE for STEREO bus) ST M(C) The PAN knob adjusts the panning of the signal sent from the MIX channel to the STEREO bus L/R channels. You can set this to the center position by holding down the (< >) key of the computer keyboard and clicking the knob. If the selected MIX bus is used as a stereo bus, this will be the BALANCE. The BALANCE knob adjusts the balance of the signal that is sent from the MIX channel to the STEREO bus L/R channels. Switches the signal sent from the MIX channel to the STEREO bus on/off. Switches the signal sent from the MIX channel to the MONO bus on/off. • LCR button When this button is on, the signal will be sent to the L/C/R buses which work in conjunction with each other. [for MONO mix channel] [for STEREO mix channel] PAN (BALANCE for STEREO bus) CSR (Center Side Ratio) The PAN knob adjusts the panning of the signal that is sent from the MIX channel to each of the L/C/R channels. You can set this to the center position by holding down the (< >) key of the computer keyboard and clicking the knob. If the selected MIX bus is used as a stereo bus, this will be the BALANCE. The BALANCE knob adjusts the balance of the signal that is sent from the MIX channel to the STEREO bus L/R channels. Adjusts the proportion of the CENTER channel level relative to the STEREO bus L/R in a range of 0-100%. 38 QL Editor Owner's Manual