Yamaha QL5 Ql Editor Owner's Manual - Page 60

❏ Channel control field 6 Level indicator 6 Indicates the automixer level. Lit green: Audio is at an appropriate level for the automixer Unlit: Lower than the appropriate level Lit red: Higher than the appropriate level NOTE Adjust the HA gain of the QL unit so that the indicator remains lit green. 7 8 7 Meter indicator Each time you press the 4 meters button in the Master field, you'll cycle between the fol- lowing three types of meter. Meter display color Meter type 9 0 Green (gain) Automix gain Yellow (input) Input level Blue (output) Output level A B NOTE Normally you should leave this set at automix gain. 8 weight Adjusts the mutual sensitivity between input channels. Adjust the weight setting so that all of the automix gain meters are at approximately the same level when there is no input. C D 9 group Each channel can be assigned to three groups (a/b/c). The channel's background color will change depending on the selected group. 0 override When you press the 3 OVERRIDE button in the Master field, the corresponding channels will switch to man mode or mute mode depending on the setting of this button. • If the channel's override button is on, turning on the master OVERRIDE button will switch the channel's mode to man. • If the channel's override is off, turning on the master OVERRIDE button will switch the channel's mode to mute. • When you turn the master OVERRIDE button off, that channel will return to its prior mode. A Channel number Indicates the channel number within the automixer. B Channel name Indicates the name of the channel that is patched. C man / auto / mute Toggles between man/auto/mute. man: Passes the audio without changing the gain. auto: The automixer will be on. mute: The channel will be muted. D preset Selects the channel's mode (man/auto/mute) when the 3 PRESET button in the master field has been pressed. The preset indicator will switch between man/auto/mute each time you press the preset button. 60 QL Editor Owner's Manual