Yamaha QL5 Ql Editor Owner's Manual - Page 34
DELAY, INSERT1/2 except for ST IN channels, DANTE 1-32, DANTE 33-64 only QL5, OMNI 1-8
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
8 TYPE Drag the knob in the screen to select the HPF (High Pass Filter) or BPF (Band Pass Filter.) 9Q Adjust the Q level of the frequency range at which the key-in signal will activate the de-esser. This parameter is valid only if the TYPE is set to BPF. 0 KEY IN SOURCE The key-in signal is set to the SELF POST EQ. ❏ DELAY 2 1 1 ON Turns the delay on/off of the currently selected channel. 2 Delay time Drag the knob in the screen to adjust the delay time of the currently selected channel. ❏ INSERT1/2 (except for ST IN channels) 1 2 5 6 7 3 4 1 POINT (Insert point) Selects the position at which insert-in/out will be patched. Choose from PRE EQ, PRE FADER, or POST ON. 2 ON Enables/disables insert-in/out. 3 OUT (Insert out) Click this to select the output port that will be assigned to insert-out, from the following choices. NONE No assignment DANTE 1-32, DANTE 33-64 (only QL5) OMNI 1-8, OMNI 9-16 (only QL5) SLOT1-1, SLOT1-2...SLOT2-15, SLOT2-16 DANTE OUTPUT 1-32, DANTE OUTPUT 33-64 (only QL5) OMNI OUT jacks 1-8, OMNI OUT jacks 9-16 (only QL5) Output channels of an I/O card installed in slots 1-2 GEQ1L(A), GEQ1R(B)...GEQ8L(A), GEQ8R(B) FX1L(A), FX1R(B)...FX8L(A), FX8R(B) PR1L(A), PR1R(B)...PR8L(A), PR8R(B) L/R outputs of GEQ rack 1-8 L/R inputs of EFFECT rack 1-8 L/R inputs of PREMIUM rack 1-8 DIGI L, DIGI R L/R channels of the DIGITAL OUT jack 34 QL Editor Owner's Manual