Yamaha QL5 Ql Editor Owner's Manual - Page 66
DSOLO EGR meter Gain Reduction meter FPLAY/REC Play/Record buttons GEffect parameters
View all Yamaha QL5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
D SOLO If "M.BAND DYNA" or "M.BAND COMP" are selected as the effect type, these buttons D allow you to monitor only the specified band from the three bands HIGH, MID, and LOW. E GR meter (Gain Reduction meter) If "M.BAND DYNA" or "M.BAND COMP" are selected as the effect type, this indicates the gain reduction amount for the H (HIGH), M (MID), and L (LOW) bands. E F G F PLAY/REC (Play/Record) buttons If "FREEZE" is selected as the effect type, you can use these buttons to record and play back the signal being input to the effect. G Effect parameters This area shows the effect parameters and knobs for the currently selected effect type. It also shows the GUI screen that are specific to the following each effect type: REV-X HALL, REV-X ROOM, REV-X PLATE, COMP276, COMP276S, COMP260, COMP260S, EQUALIZER601, and OPENDECK. 66 QL Editor Owner's Manual