Yamaha QL5 Ql Editor Owner's Manual - Page 62

INS2 CH1-CH64 (CH 1-32 on the QL1) Insert-out 2 of input channel 1-64 (1-32 on the QL1) INS2 MIX1-MIX16 MIX channel 1-16 insert out 2 INS2 MTRX1-MTRX8 MATRIX channel 1-8 insert out 2 INS2 ST L, INS2 ST R, INS2 M(C) Insert-out 2 of STEREO channel L/R or the MONO channel 3 Module graphic This area shows a graphic of the effect module or the GEQ module that is currently assigned to the rack, and the parameters of that module. Double-click this to open the module editor for that rack unit. By holding down the (< >) key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window of the QL itself. 4 Input meter/Output meter These indicate the level of the signals being input and output from the effect module or the GEQ module. 5 Output patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R output channels of the internal effect. NONE No assignment CH 1-64 (CH 1-32 on the QL1) INPUT CH 1-64 (CH 1-32 on the QL1) STIN1L-STIN8R ST IN channel 1-8 (L/R) INS1 CH1-CH64 (CH 1-32 on the QL1) Insert-in 1 of INPUT CH1-64 (1-32 on the QL1) INS1 MIX1-MIX16 MIX channel 1-16 insert in 1 INS1 MTRX1-MTRX8 MATRIX channel 1-8 insert in 1 INS1 ST L, INS1 ST R, INS1 M(C) Insert-in 1 of STEREO channel L/R or the MONO channel INS2 CH1-CH64 (CH 1-32 on the QL1) Insert-in 2 of input channel 1-64 (1-32 on the QL1) INS2 MIX1-MIX16 MIX channel 1-16 insert in 2 INS2 MTRX1-MTRX8 MATRIX channel 1-8 insert in 2 INS2 ST L, INS2 ST R, INS2 M(C) Insert-in 2 of STEREO channel L/R or the MONO channel 6 BYPASS This switches the effect module or the GEQ module between active and bypassed states. An effect module is active when the BYPASS button is dark. 62 QL Editor Owner's Manual