Yamaha RX-V496 Owner's Manual - Page 10
Display, TAPE/MD MONITOR indicator - stereo receiver
View all Yamaha RX-V496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CONTROLS AND FUNCTIONS Display 1 t indicator The "t" indicator lights up when the built-in DTS decoder is turned on. 2 DSP program indicators The name of the selected DSP program lights up in the following cases: • When the tuner is selected as the input source. • When DSP program No. 2, 3 or the subprogram "ENHANCED" of No.1 is selected. 3 Multi-information display This display shows various information: for example the name of the selected DSP program and the various settings during adjustment with the SET MENU. The current station frequency and band (FM or AM) also appear when the tuner is selected as the input source. 4 Input source indicators One of the arrows for these indicators lights up depending on which source is selected. 5 TAPE/MD MONITOR indicator This lights up when the tape deck or MD recorder, etc. is selected as the input source by pressing TAPE/MD MON / EXT. DECODER (or TAPE/MD). 6 g and o indicators " g " lights up when the built-in Dolby Digital decoder is on and the signals of the selected source are encoded with Dolby Digital. " o " lights up when the built-in Dolby Pro Logic decoder is on. 7 x indicator " x " lights up when the built-in digital sound field processor is on. 8 MEMORY indicator This flashes for about five seconds after pressing MEMORY. During this period, the displayed station can be stored in the memory. 9 AUTO indicator This lights up when the unit is in the automatic tuning mode. 0 STEREO indicator This lights up when an FM stereo broadcast with sufficient signal strength is being received. q Signal-level indicator This indicates the signal level of the station being received. If multipath interference is detected, the indication decreases. w SLEEP indicator This lights up while the built-in SLEEP timer is on. 6