Yamaha RX-V496 Owner's Manual - Page 24

BASIC OPERATION PLAYING A SOURCE When using the remote control, press AMP(TUNER) on the component selector. 2 4 1,6 - + - + L R 37 6 4 Select the desired input source with INPUT SELECTOR (or the input selector buttons). (Turn on the TV monitor for video sources.) The name of the selected input source appears for a moment and the arrow for the selected input source indicator lights up on the display. Front panel or Remote control 6 2 4 7 1 Set VOLUME to the "m" position. 2 Turn the power on. Front panel Front panel or Remote control 3 Press SPEAKERS A or B to select the main speakers to be used. If you use two main speaker systems, press both A and B. Front panel Input source a. To select a tape or an MD source Press TAPE/MD MON / EXT. DECODER (or TAPE/MD) so that the "TAPE/MD Front panel MONITOR" indicator lights up on the display. b. To select a source connected to the EXTERNAL DECODER INPUT terminals Press TAPE/MD MON / EXT. DECODER repeatedly (or EXT. DEC.) until "EXT. DECODER" appears on the display. Notes • An audio source can not be played if the "TAPE/MD MONITOR" indicator lights up or if "EXT. DECODER" appears. Press TAPE/ MD MON / EXT. DECODER twice (or TAPE/MD once) to turn off the "TAPE/MD MONITOR" indicator. Press TAPE/MD MON / EXT. DECODER once (or EXT. DEC.) to turn off "EXT. DECODER". • If you select and play a video source when the "TAPE/MD MONITOR" indicator lights up or "EXT. DECODER" appears, the play back result will be a video image from the video source and the sound from the audio source selected by using TAPE/MD MON / EXT. DECODER (or TAPE/MD or EXT. DEC.). y For the DVD/LD, TV/digital TV and satellite tuner sources, the current input mode is also shown. Refer to page 22 for details about the input mode. 20