Yamaha RX-V496 Owner's Manual - Page 15
AM loop antenna included, Connecting the AM loop antenna, Outdoor AM antenna, Ground GND terminal
View all Yamaha RX-V496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
INTRODUCTION PREPARATION s AM loop antenna (included) AM loop antenna s Connecting the AM loop antenna 1 3 2 4 5 Antenna stand s Outdoor AM antenna Vinyl covered wire (5 m to 10 m) CONNECTIONS The AM loop antenna can be removed from the stand and attached to a wall, etc. However, note that the reception sensitivity may deteriorate if the antenna is attached to a metal or steel reinforced wall. Notes • The AM loop antenna should be placed away from this unit. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. 1 Press the tab and unlock the terminal hole. 2 Insert the AM loop antenna lead wires into the AM ANT and GND terminals. 3 Return the tab to its original position to lock the lead wires. Lightly pull the lead wires to confirm a good connection. 4 Attach the loop antenna to the antenna stand. 5 Orient the AM loop antenna so that the best reception is obtained. If you cannot obtain good reception with the AM loop antenna, connect 5 m to 10 m of vinyl covered wire to the AM ANT terminal and extend it outdoors from a window. s Ground (GND terminal) For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. BASIC OPERATION ADVANCED OPERATION APPENDIX English 11