Yamaha RX-V496 Owner's Manual - Page 19
Connecting Speakers, Main speaker terminals
View all Yamaha RX-V496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
INTRODUCTION PREPARATION Connecting Speakers Main speakers A CONNECTIONS Main speakers B Right Subwoofer connection If you have a subwoofer with builtin amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input terminal of the subwoofer system to the SUBWOOFER OUTPUT terminal of this unit. Left Right Left + R - MAIN - L + A MAINS CENTER R REAR (SURROUND) L + + - - B SET BEFORE POWER ON MAIN A OR B : 4ΩMIN. /SPEAKER A + B : 8ΩMIN. /SPEAKER CENTER : 6ΩMIN. /SPEAKER REAR : 6ΩMIN. /SPEAKER MAIN A OR B : 8ΩMIN. /SPEAKER A + B : I6ΩMIN. /SPEAKER CENTER : 8ΩMIN. /SPEAKER REAR : 8ΩMIN. /SPEAKER 120 V 60Hz 100W MAX. TOTAL SWITCHED (U.S.A. model) Center speaker Right Left Rear speakers Be sure to connect the right channel (R), left channel (L), "+" (red) and "-" (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTIONS • Use speakers with the specified impedance shown on the rear panel of this unit. • Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage the unit and/or speakers. s Main speaker terminals One or two speaker systems can be connected to these terminals. If you use only one speaker system, connect it to either of the SPEAKERS A or B terminals. s Rear speaker terminals A rear speaker system can be connected to these terminals. s Center speaker terminal A center speaker can be connected to this terminal. BASIC OPERATION ADVANCED OPERATION APPENDIX English 15