Yamaha UW500 UW500 Owners Manual - Page 12
Parts and Functions, n Front Panel
![]() |
View all Yamaha UW500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Parts and Functions s Front Panel 12 34 A DIGITAL IN jack Digital signal is input here from an MD or CD player using an optical digital cable (with a square plug). Set the INPUT SELECT switch on the rear panel to "DIGITAL." B DIGITAL OUT jack This jack is used to record a digital signal from the computer to a digital recorder, such as an MD recorder. Use an optical digital cable (with a square plug) for connection. NOTE Signals input at INPUT 1-3, AUX IN and DIGITAL IN cannot be route directly to the DIGITAL OUT jack. C INPUT 1/2 jacks Audio signal is input here from a microphone, electric guitar, electric bass, electronic musical instrument, or CD player. Use a standard monaural plug cable for connection. NOTE To use INPUT 1-3 jacks, set the INPUT SELECT switch on the rear panel to "STEREO" or "MONO." 5 6 78 D INPUT 1/2 gain switches These switches enable you to select a type of signal input at INPUT 1 and 2 jacks. For stereo line input, set the gain switch to "LINE" and input the left signal to the INPUT 1 jack and the right signal to the INPUT 2 jack. Set the INPUT SELECT switch on the rear panel to "STEREO." E INPUT 1/2 volume knobs These volume knobs enable you to adjust the volume level of the audio signal input at INPUT 1 and 2 jacks. F PHONES jack Connect headphones with a standard jack here. Use the OUTPUT knob to adjust the headphone volume. 12
![](/manual_guide/products/yamaha-uw500-uw500-owners-manual-b638abb/12.png)