Yamaha UW500 UW500 Owners Manual - Page 47
Changing the connection during playback (PC OUT Æ MIDI OUT)
![]() |
View all Yamaha UW500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Changing the driver setting (MIDI Patch Screen) • Changing the connection during playback (PC OUT → MIDI OUT) You can change the I/O assignment of the computer's output port and the UW500's output port. The left column shows the computer's output ports (OUT 1-6), and the top column shows the UW500's output ports (1-6). With the default settings, ports with the same number are connected to each other. However, you can change this setting by checking the check boxes. If you check multiple check boxes vertically, MIDI signals from multiple output ports on the computer are merged and transmitted to one output port on the UW500. If you check multiple check boxes horizontally, a MIDI signal from one output port on the computer is distributed to multiple output ports on the UW500. NOTE See page 44 for more information on the relationship between the UW500's I/O ports and the port numbers. Routing MIDI signals from the computer's output ports 1 and 2 to MIDI OUT 1(MIDI OUT terminal) on the UW500 Check the check boxes as shown on the right, and click [OK] to enable the setting. 47
![](/manual_guide/products/yamaha-uw500-uw500-owners-manual-b638abb/47.png)