Yamaha UW500 UW500 Owners Manual - Page 13
Goutput Knob Husb Led, Track Down
![]() |
View all Yamaha UW500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
G OUTPUT knob This knob has two functions. It switches the power on and off (stand-by) each time a click sound is heard when you turn the knob When the power is on, the knob enables you to adjust the UW500's overall volume. Note that the OUTPUT knob setting does not affect the output at the DIGITAL OUT jack and the input at the AUX IN jacks on the rear panel. Even when the power is off (standby), a small current flows through the unit. If you plan not to use the UW500 for a long period of time, be sure to remove the power adaptor from the AC outlet. Parts and Functions H USB LED The LED lights up in red when the power is turned on to the UW500. It lights up in green when the computer is connected to the UW500 correctly. It flashes in green when the UW500 transmits or receives MIDI signal. The LED lights up in orange if the INPUT SELECT switch is set to "TRACK DOWN" (page 15). The LED flashes in orange if the sampling frequency of the signal input at the DIGITAL IN jack is not appropriate. In this case, select the correct frequency option in the application on the computer according to the sampling frequency of the input signal. The LED flashes in red and green alternately when the copyrighted signal is input at the DIGITAL IN jack. The signal cannot be recorded on the computer (page 8). 13
![](/manual_guide/products/yamaha-uw500-uw500-owners-manual-b638abb/13.png)