Yamaha UW500 UW500 Owners Manual - Page 38
n Mastering to an MD, When the song ends, stop the MD recorder.
![]() |
View all Yamaha UW500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Hard Disk Recording 11. Click the Stop button in the Play Control panel to stop recording. NOTE To redo recording, click the undo button on the Tool bar to cancel the recording. s Mastering to an MD computer XGworks Soft Synthesizer UW500 USB terminal DIGITAL OUT jack MD recorder headphone 1. Connect an MD recorder to the UW500's DIGITAL OUT jack. Before making connections, be sure to turn off the power to the UW500. NOTE Analog signals input at INPUT 1-3 or AUX IN cannot be route to the DIGITAL OUT jack. Therefore, if you wish to record the sound of an external MIDI tone generator, first you need to record the sound, as well as the guitar sound, to the hard disk. 2. Turn the OUTPUT knob to the ON position to turn on the power to the UW500. Set the OUTPUT knob to the minimum position (just above the ON label). 3. Start recording on the MD recorder, then click the Play button in the Play Control panel of XGworks to start playing back the song. 4. When the song ends, stop the MD recorder. 38
![](/manual_guide/products/yamaha-uw500-uw500-owners-manual-b638abb/38.png)