Yamaha UW500 UW500 Owners Manual - Page 49
THRU output of MIDI signals (MIDI IN Æ MIDI OUT), Thru ON/OFF
![]() |
View all Yamaha UW500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Changing the driver setting (MIDI Patch Screen) • THRU output of MIDI signals (MIDI IN → MIDI OUT) You can route MIDI signals received at the input port(s) of the UW500 directly to the output port(s) of the UW500 (this is called THRU output). This routing is useful when you wish to route MIDI signals from a MIDI keyboard directly to a tone generator. The left column shows the UW500's output ports (1-6), and the top column shows the UW500's input ports (1-2). To enable this function, check the "Thru ON/OFF" check box in the lower right corner of the screen. If you check multiple check boxes vertically, a MIDI signal from one input port on the UW500 is distributed to multiple output ports on the UW500. If you check multiple check boxes horizontally, MIDI signals from multiple input ports on the UW500 are merged and transmitted to one output port on the UW500. NOTE See page 44 for more information on the relationship between the UW500's I/O ports and the port numbers. Routing MIDI signals directly from MIDI IN 1(MIDI IN terminal) to MIDI OUT 3(B port of TO TG terminal) First check the "Thru ON/OFF" check box on the lower right corner of the screen. Then check the check box as shown on the right, and click [OK] to enable the setting. 49
![](/manual_guide/products/yamaha-uw500-uw500-owners-manual-b638abb/49.png)